Concorde V6-3.2L VIN J (2000)
Air Door Actuator / Motor: Service and Repair
Blend Door Actuator Replacement
The blend-air (temperature) door actuator is an electric motor which mechanically positions the temperature door. A feedback strip in the actuator allows
the computer control to know the exact position of the temperature door at all times. The blend-air door actuator is not serviceable and must be replaced
if found to be defective.
Mode Door Actuator Locations
The temperature door actuator is located at the bottom of the heater housing at the center tunnel.
REMOVAL
Negative Battery Cable Remote Terminal
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove left and right underpanel silencer/ducts.
