Crossfire V6-3.2L VIN L (2004)
7. Remove the drain plug from the crankcase and allow the oil to drain into the pan. Inspect the drain plug threads for stretching or other damage.
Replace the drain plug and gasket if damaged.
8. Remove the oil filter.
9. Install the drain plug (1) and tighten to 30 Nm (22 ft. lbs.).
10. Install the lower splash shield. Tighten to 7 Nm (5 ft. lbs.).
11. Lower the vehicle and fill the crankcase with specified type and amount of engine oil.
12. Install a new oil filter.
13. Install the oil filler cap.
14. Start the engine and inspect for leaks.
15. Turn off the engine and inspect the oil level.
USED ENGINE OIL DISPOSAL
Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. See the warning above for common practices
and recommendations.
