Crossfire SRT-6 V6-3.2L SC VIN N (2005)
10. Remove the nut (1) attaching the accelerator pedal to the floor. Disconnect the electrical connector and remove the pedal from the welded stud.
11. Unhook the storage pocket (1) and remove it from the vehicle.
12. Disconnect the electrical connector from the parking brake switch (4).
13. Remove the plugs (3) and then remove the rear edge guard (2) in the lower area.
NOTE: Cut the single-piece carpet (1) along dotted lines in order to avoid time-consuming removal of the heater or air conditioning systems.
CAUTION: Do not damage the electrical and pneumatic lines.
