New Yorker V6-181 2972cc 3.0L SOHC VIN 3 FI (1989)
Body Controller: Tools and Equipment
Digital Volt/Ohmmeters
Digital Volt/Ohmmeters
When using a digital volt/ohmmeter to check resistance. Make sure you determine any built in resistance of the meter by touching both leads together.
For example, after touching the leads together, the meter indicates 0.6 ohms. This is your 0 point. When checking the circuit resistance, 0.0 ohms
would be 0.6 ohms and 0.5 ohms of resistance would be 1.1 ohms.
After the Problem has been Found and Repairs are Made
It is necessary to test and reevaluate the system to be sure that all problems have been corrected.
Tools and Equipment
Make sure you have the following equipment:
1. DRB II
2. Analog volt/ohmmeter
3. Jumper wires