Pacifica V6-3.8L (2008)
Parking Assist Distance Sensor: Service and Repair
Park Assist Sensor - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove rear fascia See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover / Fascia/Service and Repair/Rear Fascia - Removal.
3. Disconnect the sensor electrical connector (2).
4. Using a trim stick or equivalent, gently pry out on the two retaining tabs (1) and pull the sensor (3) straight out of the retaining bezel (2).