Pacifica V6-3.8L (2008)
Rear Door Window Glass: Service and Repair
Rear Door Glass - Installation
INSTALLATION
1. Place glass into inner door panel position.
2. Using care, push down on window glass to lock lift plate into lift plate bracket.
3. Install door fixer glass run channel. . See: Window Track/Service and Repair/Rear Door Run Channel-Door Fixed Glass
4. Ensure window glass is in the glass run channel.
5. Remove inner belt weatherstrip.
6. Cycle glass upward and visually check that window is properly seated in glass run.
7. Install speaker.
8. Install watershield. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door
Watershield/Installation.
9. Install door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Installation.
10. Close door.
