Pacifica V6-3.8L VIN L (2005)
CD Changer: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove instrument panel center bezel.
CD/DVD Player
3. Remove screws holding CD/DVD changer.
4. Disconnect the wire harness connector from back of the CD/DVD changer.
5. Remove the CD/DVD changer from the vehicle
INSTALLATION
1. Connect the wire connector to the CD/DVD changer.
2. Insert the CD/DVD changer into the instrument panel.
NOTE: Use care when inserting CD/DVD changer that cable is not pinched or trapped against instrument panel.
3. Install CD/DVD changer mounting fasteners Tighten to 2 N.m (22 in. lbs.).
4. Install instrument panel center bezel.
5. Connect the battery negative cable.