PT Cruiser L4-2.4L (2008)
Convertible Top Weatherstrip: Service and Repair
Retainer-Header Weatherstrip - Convertible
Removal - Convertible
REMOVAL - CONVERTIBLE
1. Remove the header and A-pillar weatherstrip See: Weatherstrip-Header/A-Pillar - Convertible/Removal - Convertible.
2. Remove the five screws (1) that secure the weatherstrip header seal retainer (2) to the windshield opening frame (3) and remove the seal retainer.
Installation - Convertible
INSTALLATION - CONVERTIBLE
1. Position the weatherstrip header seal retainer (2) onto the windshield opening frame (3).
2. Install the five screws (1) that secure the weatherstrip header seal retainer to the windshield opening frame. Tighten the screws to 2.2 Nm (20 in.
lbs.).
3. Install the header and A-pillar weatherstrip See: Weatherstrip-Header/A-Pillar - Convertible/Installation - Convertible.