PT Cruiser L4-2.4L (2008)
11. Non-Turbo Engine - Position the power distribution center and bracket back into place and install the two bolts (1) fastening the power
distribution center and mounting bracket (2) in place.
12. Turbo Engine - Position the power distribution center and bracket back into place and install the two bolts (1) fastening the power distribution
center and mounting bracket (2) in place.
13. Connect the wiring connector (2) to the brake fluid level switch in the brake fluid reservoir (1).
14. Install the battery. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery - Installation
15. Install the air cleaner housing.See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service
and Repair/Air Cleaner Housing - Installation
16. Hook up the scan tool to initialize the ABM and perform the following:
a. Clear any faults.
b. Fill the master cylinder to the proper fill level and bleed the base and ABS hydraulic systems. See: Brake Bleeding