PT Cruiser L4-2.4L (2008)
10. Remove the lower return spring (4).
11. Compress and remove both shoe hold-down spring clips (1).
12. Remove both shoes and remaining parts as an assembly from the anchor (3) and the wheel cylinder (2).
13. Position a 1/2 inch (13 mm) box wrench (2) over the retainer fingers on the end of the parking brake cable housing (1). Compress the cable
housing retaining fingers with the wrench, then pull the cable housing out of the support plate (4). Remove the wrench as the parking brake cable
retainer is freed from the mounting hole in the brake support plate.
14. Remove the four brake support plate mounting bolts (8). Separate the brake support plate (9) from the spindle (10).