PT Cruiser L4-2.4L (2008)
5. Remove any brake drum retaining clips, then the drum (3). See: Drum Brake System/Brake Drum/Service and Repair/Removal and
Replacement/Removal
6. Remove the dust cap (1) from the rear hub and bearing (4).
7. Remove the hub nut (2) securing the rear hub and bearing (4) to the spindle. Slide the hub and bearing off the spindle.
8. Compress the cable return spring, then remove the parking brake cable from the parking brake lever.
9. Remove the lower return spring (4).
10. Compress and remove both shoe hold-down spring clips (1).
11. Remove both shoes and remaining parts as an assembly from the anchor (3) and the wheel cylinder (2).