PT Cruiser L4-2.4L (2008)
24. Remove the bolt (7), nut (1) and washer (2) securing the watts link bell crank (9) to the center of the axle (11).
25. If equipped with a rear stabilizer bar, on each side, remove the bolt (3) securing the stabilizer bar cushion retainer (1) to the rear axle (2). Lift each
retainer from the slot in the axle allowing the stabilizer bar to hang free.
26. Position a transmission jack or equivalent under the center of the axle raising it enough to support the axle.
27. On each side, remove the lower mounting bolt (5), nut (7) and washer (6) securing the shock absorber (2) to the axle (4).