PT Cruiser L4-2.4L Turbo (2009)
7. Remove the lower return spring (4).
8. Compress and remove both shoe hold-down spring clips (1).
9. Remove both shoes and remaining parts as an assembly from the anchor (3) and the wheel cylinder (2).
10. Remove the adjuster spring (5) from the leading shoe and the lever pawl (3).
11. Remove the lever pawl (3) from the pivot on the leading shoe (4) and slide it out from under the adjuster (6).
12. Remove the adjuster (6) and the upper return spring (2) from the shoes (4, 7).
Installation
INSTALLATION
NOTE: Perform 1 through 13 on each side of vehicle to complete shoe set installation, then proceed to 14.
