PT Cruiser L4-2.4L Turbo (2009)
6. Install the parking brake shoe assembly (includes shoes, lower spring and adjuster) over the shoe actuator lever and anchor, onto the disc brake
adapter (5) using the hold-down pins and clips (2).
7. Install the upper return spring (1).
8. Slide the hub and bearing (2) onto the rear spindle (6).
9. Install a NEW hub and bearing retaining nut (11). Tighten the hub nut to 217 Nm (160 ft. lbs.).
10. Install the hub and bearing dust cap (10).
11. Install the brake rotor (8).
12. Install the disc brake caliper (1). Install the two caliper guide pin bolts. Tighten the bolts to 22 Nm (192 in. lbs.).
