PT Cruiser L4-2.4L Turbo (2009)
Engine - Coolant Temperature Sensor/Switch: Service and Repair
Engine Coolant Temperature Sensor - Removal
2.0L/2.4L ENGINE
Non-Turbo
1. Disconnect negative battery cable.
2. Partially drain cooling system below level of engine coolant temperature sensor (1).
3. Disconnect engine coolant temperature sensor electrical connector.
4. Remove engine coolant temperature sensor (1).
Turbo
1. Disconnect negative battery cable.
2. Partially drain cooling system below level of engine coolant temperature sensor (2).
3. Remove upper torque strut See: Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Engine Torque Strut/Service and
Repair/Removal and Replacement/Engine Torque Strut - Removal.
4. Disconnect engine coolant temperature sensor electrical connector.
5. Remove engine coolant temperature sensor (2).