PT Cruiser L4-2.4L Turbo (2009)
NOTE: Illustration shown with front floor carpet removed for clarity.
1. If removed, position the right rear intermediate floor duct (2) into the vehicle and engage it to the right floor distribution duct (1).
2. Position the right rear floor duct (3) onto the vehicle and install the rear of the duct into the opening in the rear carpet.
3. Engage the right rear floor duct to the right rear intermediate floor duct and to the left rear floor duct (6).
4. Install the two screws (4) that secure the right rear floor duct to the floor panel. Tighten the screws to 2 Nm (17 in. lbs.).
5. Install the push-pin retainer (5) that secures the rear carpet to the right rear floor duct.
6. Install the center floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Installation.
LEFT REAR FLOOR DUCT
NOTE: Illustration shown with front floor carpet removed for clarity.
1. Position the left rear floor duct (4) onto the vehicle and install the rear of the duct into the opening in the rear carpet.
2. Engage the left rear floor duct to the right rear floor duct (1).
3. Install the two screws (3) that secure the left rear floor duct to the floor panel. Tighten the screws to 2 Nm (17 in. lbs.).
4. Install the push-pin retainer (2) that secures the rear carpet to the left rear floor duct.
5. Install the center floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Installation.
