PT Cruiser L4-2.4L Turbo (2009)
Control Assembly: Description and Operation
DESCRIPTION
The A/C-heater control (1) for the manual temperature control (MTC) single zone system allows one temperature setting for the entire vehicle. All
controls are identified by ISO graphic symbols.
The heating-A/C system uses a combination of electrical and cable operated controls. These controls provide the vehicle operator with a number of
setting options to help control the climate and comfort within the vehicle.
The A/C-heater control is located in the instrument panel and contains:
-
a rotary control for mode control of the discharged air (2).
-
a rotary control for fan speed selection and turning the heating-A/C system on and off (3).
-
a rotary control for temperature control of the discharged air (4).
-
a push-button control for recirculation control of the discharged air (5).
-
a push-button control for turning the A/C on and off (6).
The A/C-heater control cannot be adjusted or repaired and must be replaced if inoperative or damaged. The control knobs for the A/C-heater control are
available for service replacement.
