PT Cruiser L4-2.4L Turbo (2009)
Control Assembly: Service and Repair
A/C and Heater Control - Installation
INSTALLATION
1. Install the A/C-heater control (8) into the instrument panel center bezel (7).
2. Install the four screws (6) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
3. Position the center bezel to the instrument panel and connect the wire harness connectors (3 and 4) to the back of the A/C-heater control.
4. Connect the control cables (1 and 9) to the mode door control lever (2) and the temperature control lever (5) and fully engage the retaining clips
that secure the control cables to the back of the A/C-heater control.
5. Connect the wire harness connectors to the accessory switches, power window switches and clock, as equipped and install the center bezel See:
Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Bezel - Installation.
6. Reconnect the negative battery cable.
