PT Cruiser L4-2.4L Turbo VIN G (2004)
6. Install the knee blocker.
7. Install the silencer pad below the knee blocker.
8. Install the master cylinder on the vehicle.
9. Remove the caps and connect refrigerant lines. Be certain the sealing O-rings are well lubricated with PAG oil and free of tears. Torque the
retaining fastener to 40 in. lbs.
10. Using a R-134a refrigerant recovery machine, evacuate and charge the refrigerant system.
11. Connect the negative (ground) cable on the battery.
12. Install the air cleaner housing.
13. Reinstall the air cleaner cover and hose to throttle body.
WARNING: Be certain a firm brake pedal is achieved prior to attempting to operate the vehicle.
14. Road test the vehicle to ensure proper operation of the brakes.
