Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
Headliner: Service and Repair
REMOVAL
1. Raise convertible top to midway position.
2. Remove convertible top header trim panel.
3. Remove screws holding headlining to convertible top header panel.
4. Remove push-in fasteners holding headlining to convertible top mechanism rearward of quarter window.
5. Remove tack strip trim panel.
6. Remove shock cords along both sides of headlining.
7. Remove roof bows from convertible top mechanism.
8. Slide roof bows from convertible top cover and headlining.
9. Remove nuts holding headlining straps to tack strip.
10. Disengage hook and loop fasteners holding headlining above rear window.
11. Separate headlining from vehicle.
INSTALLATION
1. Position headlining from vehicle.
2. Engage hook and loop fasteners holding headlining above rear window.
3. Install nuts holding headlining straps to tack strip.
4. Install roof bows from convertible top mechanism.
5. Snap plastic retainer strips on headlining and convertible top cover into channels on roof bows, working from rear bow forward.
6. Install shock cords along both sides of headlining.
7. Install tack strip trim panel.
8. Install push-in fasteners holding headlining to convertible top mechanism rearward of quarter window.
9. Install screws holding headlining to convertible top header panel.
10. Install convertible top header trim panel.
11. Lower and secure convertible top.
