chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Convertible Top - Actuation Delayed When Raised|Page 7759 > < Convertible Top - Actuation Delayed When Raised|Page 7754
Page 1
background image

Technical Service Bulletin # 236096

Date: 961004

Convertible Top - Actuation Delayed When Raised

NO: 23-60-96

GROUP: Body

DATE: Oct. 4, 1996

SUBJECT: 
Convertible Top Actuation Is Delayed When Raised

MODELS: 
1996 - 1997 (JX) Sebring Convertible

SYMPTOM/CONDITION:

Convertible top does not start to raise within 2 seconds after the switch is activated.

POLICY: Reimbursable within the provisions of the warranty. 

TIME ALLOWANCE:

Labor Operation No:

08-52-40-90

1.0 Hrs.

FAILURE CODE:

XX - Service Adjustment

Repair Procedure

This bulletin involves bleeding the convertible top motor and pump assembly.

1.

Lower the top to the full down position.

2.

Remove the rear seat cushion, seat back, and inner quarter trim panels.

3.

Remove the cylinder mounting brackets and separate the cylinders from the trunnion pivot mounts. Figure 1 

4.

Rotate the cylinders 180 degrees (the hose fittings will now face the front of the car).

5.

Disconnect the motor wire connector retaining clip from the body.

6.

Remove the hydraulic hoses from the body retaining clips from the right and left hand side of the pump/motor assembly.

7.

Rotate and raise the motor/pump assembly so the reservoir is in the up position. The Rubber filler plug will be at the top.

Convertible Top - Actuation Delayed When Raised|Page 7759 > < Convertible Top - Actuation Delayed When Raised|Page 7754