Sebring Convertible V6-2.5L VIN H (1997)
9. Remove the clip holding the power steering fluid cooler lines together.
10. Remove the hose clamp attaching the power steering fluid return hose from the engine, to the power steering fluid cooler lines.
11. Remove the power steering fluid return hose from the power steering gear.
12. Remove the power steering fluid cooler lines from the routing clip on the left front frame rail.
13. Separate the power steering cooler line assembly into 2 separate pieces.
14. Remove each cooler line separately from the vehicle. The cooler lines are removed out through the front of the vehicle in the area between the
radiator and the closure panel.
Installation
1. Install the cooler lines individually using the reverse procedure of their removal.
2. Install the cooler lines in the routing clip on the left frame rail
CAUTION: Only the original equipment crimp style clamp can be used when installing the power steering fluid hoses. Use of a different style
clamp may not provide proper retention of the hose to the power steering oil cooler.
3. Install the hose clamps on the power steering fluid hoses.
