Sebring Convertible V6-2.5L VIN H (1997)
Alignment: Specifications
NOTE: All specifications are taken with vehicle fluid levels all full and no passengers.
FRONT:
Camber:
Acceptable Range ......................................................................................................................................................................................... -0.5° to +0.7°
Preferred Setting ........................................................................................................................................................................................................ +0.1°
Camber Side to Side Difference Not to Exceed [1]:
Acceptable Range ............................................................................................................................................................................................. 0.7° or less
Preferred Setting .......................................................................................................................................................................................................... 0.0°
Toe Right/Left:
Acceptable Range .............................................................................................................................................................................. 0.05° out to 0.15° in
Preferred Setting .................................................................................................................................................................................................... 0.05° in
Total Toe [2]:
Acceptable Range .................................................................................................................................................................................. 0.1° out to 0.3° in
Preferred Setting ...................................................................................................................................................................................................... 0.1° in
Caster:
Acceptable Range ........................................................................................................................................................................................ +2.1° to +4.1°
Preferred Setting ........................................................................................................................................................................................................ +3.1°
Caster Side to Side Difference Not to Exceed [1]:
Acceptable Range ............................................................................................................................................................................................. 1.0° or less
Preferred Setting .......................................................................................................................................................................................................... 0.0°
Fender Lip to Ground Height:
Acceptable Range ............................................................................................................................................................................ 27.25 to 28.75 inches
Preferred Setting .............................................................................................................................................................................................. 28.0 inches
REAR:
Camber:
Acceptable Range ......................................................................................................................................................................................... -0.5° to +0.3°
Preferred Setting ......................................................................................................................................................................................................... -0.1°
Toe Right/Left:
Acceptable Range .............................................................................................................................................................................. 0.05° out to 0.15° in
Preferred Setting .................................................................................................................................................................................................... 0.05° in
Total Toe [2],[3]:
Acceptable Range .................................................................................................................................................................................. 0.1° out to 0.3° in
Preferred Setting ...................................................................................................................................................................................................... 0.1° in
Thrust Angle:
Acceptable Range ..................................................................................................................................................................................... -0.85° to +0.15°
Preferred Setting .......................................................................................................................................................................................................... 0.0°
Fender Lip to Ground Height:
Acceptable Range ............................................................................................................................................................................ 27.25 to 28.75 inches
Preferred Setting .............................................................................................................................................................................................. 28.0 inches
[1]: Remove the front shock/spring/upper control arm assemblies. Remove the 2 upper control arm bracket to body locator pins. Install the front
shock/spring/upper control arm assembly back in the vehicle. Using the available clearance between the attaching bolts and the shock tower bolts, adjust
the side to side Camber and/or Caster to the preferred settings shown above.
[2]: Total toe is the arithmetic sum of the left and right wheel toe settings. Positive is Toe-in, negative is Toe-out. Total toe must be equally split
between each front wheel to ensure the steering wheel is centered after setting Toe. Left and right toe must be equal to within 0.02 degrees.
[3]: Toe out when backed on alignment rack is toe in when driving.