Sebring LXI Convertible V6-2.7L VIN R (2002)
4. Install the lower shock rod isolator bushing in the bottom of the upper shock mount. The smaller end is to be pointed away from the mount when
installed.
5. Install the upper shock rod isolator bushing and sleeve in the upper shock mount until seated into lower bushing. The smaller end of the bushing is
to be pointed away from the mount when installed.
6. Install the lower coil spring isolator on the lower spring seat of the shock absorber.
Fig. 51
7. Install the jounce bumper as shown on the rod of the shock absorber.
