Sebring Sedan L4-2.4L VIN J (2004)
6. Using a hammer and Installer, Special Tool C-4689 or C-4842 (depending on piston size), and Handle, Special Tool C-4171, drive the boot into
the counterbore of the caliper as necessary (Fig. 38).
7. Reinstall the caliper on the vehicle and bleed the brakes as necessary.
INSTALLATION
1. Completely retract caliper piston back into piston bore of caliper assembly.
2. Lubricate both adapter abutments with a liberal amount of Mopers Multipurpose Lubricant, or equivalent.
3. If removed, install the rotor on the hub making sure it is squarely seated on the face of the hub (Fig. 39).
CAUTION: Use care when installing caliper assembly onto adapter so the guide pin bushings and sleeves do not get damaged by the mounting
bosses on adapter.
