Sebring Sedan L4-2.4L VIN X (2001)
CAMSHAFT SPROCKETS
1. Disconnect negative battery cable.
2. Remove timing belt.
3. Hold camshaft sprockets with Special Tool 6847 while removing center bolts (Fig. 117).
CRANKSHAFT SPROCKET
1. Disconnect negative cable from battery.
2. Remove timing belt.
3. Remove crankshaft sprocket using Special Tools 6793 and C-4685-C2 (Fig. 118).
CLEANING
Do not attempt to clean a timing belt. If contamination from oil, grease, or coolants have occurred, the timing belt should be replaced.
Clean all sprockets using a suitable solvent. Clean all sprocket grooves of any debris.
INSTALLATION
CRANKSHAFT SPROCKET
CAUTION: The crankshaft sprocket is set to a predetermined depth from the factory for correct timing belt tracking. If removed, use of Special Tool
6792 is required to set the sprocket to original installation depth. An incorrectly installed sprocket will result in timing belt and engine damage.
