Sebring Sedan L4-2.4L VIN X (2001)
1. Install replacement wheel stud into Range of hub and bearing assembly. Install washers on wheel stud, then install a wheel lug nut on stud with flat
side of lug nut against washers.
2. Tighten the wheel lug nut, pulling the wheel stud into the flange of the hub and bearing assembly. When the head of the stud is fully seated against
the bearing flange, remove lug nut and washers from wheel stud.
3. Install brake rotor on front hub.
4. Install disc brake caliper and adapter as an assembly on knuckle.
5. Install front wheel and tire assembly. Install front wheel lug nuts and torque to 135 Nm (100 ft. lbs.).
6. Lower vehicle.
