Sebring Sedan V6-2.7L Flex Fuel (2007)
Crankshaft Main Bearing: Service and Repair
STANDARD PROCEDURE - CRANKSHAFT MAIN BEARING FITTING
The grade marks for the cylinder block main bearing bore grade is located on the pan rail just below the left side engine mount bracket. These marks are
read left to right, corresponding to main bore 1, 2, 3, 4.
The main bearings are "select fit" to achieve proper oil clearances. For main bearing selection, the block and crankshaft have grade identification marks.
The grade marks for the crankshaft are located on the rearmost crankshaft counter weight as shown. The crankshaft journal grade marks are read left to
right, corresponding with journal number 1, 2, 3, 4.
