Town & Country AWD V6-3.8L VIN L (2003)
Alternator Pulley: Service and Repair
GENERATOR DECOUPLER PULLER
REMOVAL
1. Release hood latch and open hood.
2. Disconnect battery negative cable.
3. Raise vehicle and support.
4. Remove the right front lower splash shield.
Fig.5 Drive Belt 3.3/3.8L
5. Remove accessory drive belt, refer to the Cooling System section for proper procedures (Fig. 5).
6. Lower vehicle.
7. Remove the Air Box, refer to the Engine section for more information.
Fig.7 Special Tool 8433 And Decoupler