Town & Country SWB FWD V6-3.3L VIN G Flex Fuel (2000)
Fig. 49
24. Remove fuel rail. Be careful not to damage the rubber injector O-rings upon removal from their ports (Fig. 49).
Fig. 50
25. Remove upper radiator hose, bypass hose and rear intake manifold hose (Fig. 50).
26. Remove intake manifold bolts. Remove intake manifold.
27. Inspect and clean manifold. Refer to Cleaning and Inspection for procedures.
WARNING: INTAKE MANIFOLD GASKET IS MADE OF VERY THIN METAL AND MAY CAUSE PERSONAL INJURY,
HANDLE WITH CARE.
