Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
License Plate Bulb: Service and Repair
REMOVAL
1. Remove screws attaching license plate lamp lens to liftgate.
2. Remove license plate lamp lens from lamp.
3. Rotate lamp socket counterclockwise one quarter turn.
License Plate Lamp Bulb
4. Pull socket from lens.
5. Pull bulb from socket.
INSTALLATION
1. Install bulb into socket.
2. Insert socket into lens.
3. Rotate lamp socket clockwise one quarter turn.
4. Place license plate lamp lens in position in lamp.
5. Install screws attaching license plate lamp lens.
6. Verify license plate lamp operation.
