Voyager L4-2.4L VIN B (2001)
6. Disconnect connector from MAP sensor (Fig. 105).
7. Remove vacuum lines for purge solenoid and PCV valve at intake manifold.
8. Remove vacuum lines for power brake booster, LDP, EGR transducer, and speed control vacuum reservoir (if equipped) at upper intake manifold
fittings.
9. Disconnect throttle, speed control (if equipped) and transaxle control (31TH equipped only) cables from throttle lever and bracket.
10. Remove the EGR tube.
11. Remove the upper manifold support bracket bolt to manifold (Fig. 107).
12. Remove engine oil dipstick from tube.
