Voyager V6-3.3L VIN 3 Flex Fuel (2003)
Antenna Control Module: Service and Repair
ANTENNA MODULE- EXPORT
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.5 Antenna Module
2. Lower headliner as necessary to access antenna module.
3. Disconnect antenna coax cable lead and electrical harness connector from antenna module.
4. Disconnect the antenna module connector from the quarter glass.
5. Remove the mounting screw and the antenna module.
INSTALLATION
1. Install the antenna module and the mounting fastener.
2. Connect the antenna connector to the quarter glass.
3. Connect the antenna lead and electrical connector to the antenna module.
4. Raise and install headliner.
5. Connect the battery negative cable.