Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
7. Remove the engine bracket-to-mount bolts.
8. Raise and suitably support the vehicle.
9. Remove the right wheel.
10. Remove the right engine undercover.
11. Lower the engine using the engine support fixture J-28467-B.
12. Remove the pump assembly by removing the steering pump retaining bolts.
Installation Procedure
1. Install the pump and the steering pump retaining bolts.
Tighten the steering pump retaining bolts to 25 Nm (18 ft. lbs.).
2. Raise the engine using the engine support fixture J-28467-B.
