Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
3. Remove the dash seal from the rack and pinion housing.
Assembly Procedure
1. Line up the notch in the dash seal and the rack and pinion housing.
2. Connect the dash seal to the housing.
3. Connect the flange and steering coupling assembly.
4. Install the rack and pinion steering assembly into the vehicle.
Rack Bearing
RACK BEARING
-
Tools Required
-
KM-472 Wrench
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.
2. Remove the adjuster plug locknut from the adjuster plug using the wrench KM-472.
