Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
4. Align and install the heater/air distributor case assembly screw above the fuel filter.
Tighten
Tighten the heater/air distributor case assembly screw to 8 N.m(71 lb-in).
5. Replace the fuel filter into its mounting clamp.
6. Install the heater/air distributor case assembly screws on either side of the heater core pipes.
Tighten
Tighten the heater/air distributor case assembly screws to 8 N.m (71 lb-in).
7. Install the two heater hoses.
8. Slide the heater hose clamps into position.
9. Install the vacuum hose.