Avenger V6-2.7L Flex Fuel (2009)
Air Bag Control Module: Service and Repair
Occupant Restraint Controller Jumper Harness - Installation
ORC JUMPER HARNESS
1. Connect the ORC jumper harness (2) to the body harness (3).
2. Connect the ORC jumper harness connector (4) to the ORC (1).
3. Install the center console See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Shifter Housing - Installation.
WARNING: Do not connect the battery negative cable See: Restraint Systems/Testing and Inspection . Serious or fatal injury may result if the
system test is not performed first.