Caliber L4-2.4L (2009)
4. Fold the seats forward.
5. Remove the nut (5) and bolts (6) and remove the 40% seat back (4).
6. Remove the nuts from the studs (2) and remove the 60% seat back.
Front
INSTALLATION
Driver Seat
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
WARNING: Discard and replace the seat back bolts (1) with new bolts when servicing. Installing used bolts may result in the loosening of the
seat back bolts after repair. Failure to follow these instructions may result in serious or fatal injury.
2. Install the seat back assembly (2) and install the new bolts (1).
3. Tighten the bolts to 40 Nm (30 ft. lbs.).
