Caliber L4-2.4L (2009)
Air Duct: Service and Repair
Floor Distribution Duct - Installation
INSTALLATION
RIGHT FRONT FLOOR DUCT
NOTE: LHD model shown. RHD model similar.
1. Connect the right front floor duct (1) to the right side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
LEFT FRONT FLOOR DUCT
NOTE: Illustration shown with instrument panel removed for clarity.
NOTE: LHD model shown. RHD model similar.
1. Connect the left front floor duct (1) to the left side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. Install the screw that secures the left front floor duct to the left side of the HVAC housing. Tighten the screw to 2 Nm (17 in. lbs.).
3. On LHD models, install the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Steering Column Opening Cover - Installation.
4. On RHD models, install the instrument panel cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Cover - Installation.
REAR FLOOR DISTRIBUTION DUCTS