Caliber L4-2.4L (2009)
Cabin Air Filter: Procedures
REMOVAL
NOTE:LHD model shown in illustrations. RHD model similar.
NOTE:Illustration shown with instrument panel removed for clarity.
1. Remove the glove box bin.
2. Disengage the two retaining tabs (1) that secure the particulate air filter cover (2) to the passenger side of the HVAC housing (3) and remove the
cover.
3. Remove the particulate air filter (1) from the HVAC housing (2) by pulling the filter element straight out of the housing.
INSTALL
NOTE:The particulate air filter is labeled with an arrow to indicate air flow direction through the filter. Make sure to properly install the particulate
air filter. Failure to properly install the filter will result in the need to replace the filter sooner than required by design.
NOTE:LHD model shown in illustrations. RHD model similar.