Caliber L4-2.4L (2009)
1. Remove the HVAC housing assembly and place it on a workbench See: HVAC Housing - Removal.
2. If equipped, remove the particulate air filter See: Cabin Air Filter/Service and Repair/Removal and Replacement/Particulate Air Filter - Removal.
3. Remove the four screws (1) that secure the air inlet housing (2) to the top of the HVAC housing (3).
4. Disengage the two plastic retaining tabs (4) that secure the air inlet housing to the HVAC housing and remove the inlet housing from the HVAC
housing.
5. If required, disassemble the air inlet housing See: Overhaul/Disassembly.
Air Inlet Housing Installation
HOUSING-AIR INLET
NOTE: LHD model shown. RHD model similar.
1. Install the air inlet housing (2) onto the top of the HVAC housing (3) and engage the two plastic retaining tabs (4). Make sure the retaining tabs are
fully engaged.
2. Install the four screws (1) that secure the air inlet housing to the HVAC housing. Tighten the screws to 1.2 Nm (10 in. lbs.).
3. If equipped, install the particulate air filter See: Cabin Air Filter/Service and Repair/Removal and Replacement/Particulate Air Filter - Installation.
4. Install the HVAC housing assembly See: HVAC Housing - Installation.
Air Inlet Screen Removal
SCREEN-AIR INLET
NOTE: LHD model shown. RHD model similar.
