Caliber L4-2.4L (2009)
If ignition key programming is unsuccessful, the scan tool will display one of the following error messages:
-
PROGRAMMING NOT ATTEMPTED - The scan tool attempts to read the programmed key status and there are no keys programmed into
SKREEM memory.
-
PROGRAMMING KEY FAILED (POSSIBLE USED KEY FROM WRONG VEHICLE) - SKREEM is unable to program an ignition key
transponder due to one of the following:
-
The ignition key transponder is ineffective.
-
The ignition key transponder is or has been already programmed to another vehicle.
-
8 KEYS ALREADY LEARNED, PROGRAMMING NOT DONE - The SKREEM transponder ID memory is full.
-
LEARNED KEY IN IGNITION - The ID for the ignition key transponder currently in the ignition lock cylinder is already programmed into
SKREEM memory.