Caliber L4-2.4L (2009)
2. Install the two nuts to mounting studs (1) on the bulkhead and tighten to 15 Nm (130 in. lbs.).
3. Plug in electrical connectors (2) to TCM (3).
NOTE: If a new TCM is installed a learn procedure must be performed.
2. Install the two nuts to mounting studs (1) on the bulkhead and tighten to 15 Nm (130 in. lbs.).
3. Plug in electrical connectors (2) to TCM (3).
NOTE: If a new TCM is installed a learn procedure must be performed.