dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Door Trim Panel - Removal|Page 5427 > < Front Door Latch - Removal|Page 5422
Page 1
background image

Front Door Panel: Service and Repair
Front Door Trim Panel - Removal

REMOVAL

1. Disconnect and isolate the battery negative cable.See: Starting and Charging/Battery/Service and Repair/Procedures/Battery System - Battery

Reconnection.

2. Unsnap and fold back the screw cap behind the interior handle and remove the screw (1).
3. Unsnap and fold back the screw cap below the trim panel (2) pull handle to access and remove the screw (3).
4. Remove the screws (4) that secure the trim panel to the inside of the door.

5. Remove the push pins (1) that secure the trim panel (2) to the door.
6. Carefully pull the bottom of the trim panel out and pull up on the panel to remove the door lock.
7. Disconnect all cables and connectors.
8. Remove the trim panel from the vehicle.

Front Door Trim Panel - Removal|Page 5427 > < Front Door Latch - Removal|Page 5422