Challenger SRT-8 V8-6.1L (2009)
9. Install the side shields (2) and install the screws.
10. Install the lumbar and recliner handles.
Rear
INSTALLATION
1. Install the seat cover to the seat back.
2. Carefully pull the seat cover over the seat foam, installing any hog rings as necessary.
3. Zip the seat back cover.
4. Engage the J-clip to the seat back.
5. Install the seat back. See: Seat Back/Service and Repair/Seat Back - Installation
6. Install the rear seat cushion. See: Seat Cushion Cover - Installation