Challenger SRT-8 V8-6.1L (2009)
6. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Tighten
wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
7. Lower vehicle to curb position.
8. Install nuts (2) on upper control arm body mounting bolts (1). Tighten nuts to 75 Nm (55 ft. lbs.).
9. Install three nuts (2) fastening shock assembly (4) to shock tower (3). Tighten nuts to 27 Nm (20 ft. lbs.).
10. If equipped, align shock tower cap (1) with shock mounting nuts (2) and snap into place.
11. If installing left upper control arm, install coolant recovery container. See: Engine, Cooling and Exhaust/Cooling System/Coolant
