Challenger SRT-8 V8-6.1L (2009)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal and Pad - Removal
REMOVAL
1. Disconnect and isolate negative battery cable.
2. Remove the knee bolster.
3. Remove driver side silencer under instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Silencer Panel - Installation.
4. Remove steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Steering
Column Opening Cover - Installation.
NOTE: When removed, discard the original clip (1). Use a new clip for reassembly.
5. Remove the clip (1), and disconnect the brake booster push rod (2).
6. Disconnect the stop lamp switch harness connector (1).
