Charger V6-3.5L (2009)
11. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
12. Fill and bleed power steering system. See: Service and Repair/Power Steering System Bleeding
Return Hose - Cooler to Reservoir
COOLER TO RESERVOIR
1. Install cooler end of return hose (3) from engine compartment side, under headlamp mounting crossmember as shown.
2. Place hose in routing clip (4) on headlamp mounting crossmember.
