Charger V6-3.5L (2009)
8. Install bolt (1) and nut (3) attaching shock clevis bracket (2) to lower control arm (7). Do not tighten at this time.
9. Tighten pinch bolt (1) attaching clevis bracket to shock assembly to 61 Nm (45 ft. lbs.).
10. Slide stabilizer link ball joint stem into clevis bracket. Install nut (2) fastening link to clevis bracket (3). Tighten nut by holding ball joint stud
while turning nut. Tighten nut using crow foot wrench on torque wrench to 128 Nm (95 ft. lbs.).
11. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Tighten
wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
12. Lower vehicle.
