Charger V8-5.7L (2008)
35. If equipped with SRT8 disc brakes, on each rear disc brake, slide caliper with pads (2) over brake rotor and align with knuckle.
36. If equipped with SRT8 disc brakes, on each rear disc brake, install caliper mounting bolts (1). Tighten bolts to 130 Nm (96 ft. lbs.).
37. If equipped with SRT8 disc brakes, on each rear disc brake, remove jack from under spring link.
38. Insert routing front parking brake cable bracket locating pin in front flange of crossmember (3), then install screw (2) fastening cable (1) routing
bracket to rear crossmember.
39. Route parking brake cable above rear crossmember, then slide cable (1, 3) through equalizer (2) above rear axle differential.
